Logo

88 85 Force Engine running rough

Start with compression and spark tests.
Then check for water in the fuel.

Install a water/fuel separating filter.

Then check the fuel system.
Could be the diaphragm has a hole?
Maybe the inline connectors, one is going bad?
Maybe the squeezie's valve is going bad?

Lastly test the overheat system.
Might need a new impeller, maybe a thermostat?
 
Thank you I did a compression test and spark and it turn out that I had no spark on cylinder #3 so we change it put a new coil and the motor is running great now we are going to run additives thru for the carbs thank you
 
Seafoam does nothing.

I use Chevrons F/I cleaner.
Comes in a black bottle.
Called Chevron with Techron.
I mix 1 bottle in a gal. gas/oil and run it through the carbs.

To do a decarb, use Mercury's Power Tune or OMC's Engine Tuner.
This can be run in the fuel but is best when sprayed in the carb throat and in the plug hole.
 
Back
Top