Hey guys I'm new to boating and I was having an issue with my mercruiser where it would die when hot. It has an inlet hole line rather than muffs.
So I ran it for probably 20 or 30 min that way while carefully watching the temp.
Idle up to 1500 rpm. Turns out I had a bad coil, but now I'm worried I might have damaged the stern drive.
Should I be concerned?
Thanks for the help
So I ran it for probably 20 or 30 min that way while carefully watching the temp.
Idle up to 1500 rpm. Turns out I had a bad coil, but now I'm worried I might have damaged the stern drive.
Should I be concerned?
Thanks for the help