I'm stumped.
FWC motors.
1 runs at 150-160 idle, risers are around 105/110
Other Would slowly just climb up and up and up.
I pulled the thermostat and ran it sans thermo now it runs 150-160ish
The odd part is the risers on the hot motor were about 5-10 degrees warmer with the port riser spiking between 115 and 130 (vs the other motors 110 pretty steady). pulled the side plugs and they look a bit munged up, but not complete passage blockage (i would have to split them to check but that would require ordering new gaskets) i don't think.
Thoughts?
FWC motors.
1 runs at 150-160 idle, risers are around 105/110
Other Would slowly just climb up and up and up.
I pulled the thermostat and ran it sans thermo now it runs 150-160ish
The odd part is the risers on the hot motor were about 5-10 degrees warmer with the port riser spiking between 115 and 130 (vs the other motors 110 pretty steady). pulled the side plugs and they look a bit munged up, but not complete passage blockage (i would have to split them to check but that would require ordering new gaskets) i don't think.
Thoughts?