gentilebrian
Contributing Member
Looking to buy twin 2008 225s. Manual says minimum compression should be 130. Seems like over 200 is very good. What would be acceptable for a motor with 700 hours?
MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
130psi is not acceptable, At 700hrs you should get around 200psi,all cylinders within 10% done with throttle fully open.