1971 17’ Chris craft lancer 225bvc/250

I need wiring diagram for the dash trim/toggle switch 6 - spades on back of switch and 4- wires to connect

Ayuh,..... What motor,..??

What drive,..??

1971 Lancers came with ChrisCraft "manufactured" engines. Depending... they can be either Chevy SBC ( 283 or 327) or Fords. Drives are stock Volvo 250s but if Chevy, had the extension intermediate housing with the engines having a standard BorgWarner bobtail. Fords, as I recall, were flywheel forward setups. Regardless, the electricals are stock Volvo and vary only depending on if the lift motors are 2 wire or 3 wire. There is nothing "special" about the dash switch, any good quality DPDT center off momentary switch will work. One that will take a rubber boot to weatherproof it is preferred.