Logo
Click for Perkins manuals!
Results 1 to 3 of 3

Thread: 4108 Senders

  1. #1

    Default 4108 Senders

    Hi guys,

    I am trying to work out what senders are what on this Perkins 4108 engine. Anyone able to help please?

    https://imgur.com/a/zXZ1F

    Sender 2 and 3 seem to be wired in parallel.

    Sender 3 is a 3 pin one.

    Cheers

    AG

  2. #2
    Join Date
    Sep 2008
    Location
    Maryland - USA
    Posts
    7,373

    Default Re: 4108 Senders

    Quote Originally Posted by bigal.nz View Post

    Sender 2 and 3 seem to be wired in parallel
    that is typical of SWITCHES used for the warning horn circuit....so any switch (high temp, low pressure) can turn on the same horn/buzzer.

    As a rule, the number of switches in a warning horn loop varies; most include high coolant temp, low engine oil pressure, high gear temp....so also include the raw water side of the cooling system too.

    For the gauges, you will have a sending unit for each gauge....a list of the installed gauges and the wiring color on their S terminal is the easiest way to start.... then match the S terminal color to the sender and not its location and you probably have 90% of the answer.

    As far as replacement, the sender must "match" the gauge, fit the thread, and then be single station or dual station version...

  3. #3

    Default Re: 4108 Senders

    Hi there forum,

    I have a Perkins 6 and it currently is running with a dropped connrod bearing. I am getting a new engine for my boat but was wondering if I pull the piston and rod, reroute the fuel, remove the valve push rods and clamp a set of bearing shells to the crank to keep up oil pressure, will the engine still run reasonably well.

Similar Threads

  1. Fuel senders
    By bud30683 in forum Boat Fuel Systems (separate from engine)
    Replies: 2
    Last Post: 10-22-2016, 08:28 PM
  2. Trim Senders
    By smchaplin in forum Mercruiser Sterndrive Archive
    Replies: 5
    Last Post: 05-09-2009, 05:50 PM
  3. Temp senders
    By ged in forum Mercruiser Sterndrive Archive
    Replies: 4
    Last Post: 05-18-2008, 03:55 PM
  4. Temp senders
    By andrewmaeyaert in forum Chrysler Inboard and Sterndrive Archive
    Replies: 3
    Last Post: 05-08-2008, 01:35 PM
  5. 283 water temperature senders
    By billrush in forum Chris Craft Engine Forum
    Replies: 10
    Last Post: 05-20-2007, 05:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •