dimitrimfogal
Regular Contributor
Long story short...I pulled this Honda off my cousins boat and put it on my '95 trophy 1802 wa . I put in new ignition switch, wiring harness , fuel filters , pulled the plugs squirted some wd40 in each cylinder, turned the prop by hand to be sure it wasn't siezed. Then , put the earmuffs on and cranked it over several times. I have fuel in the front filter, fuel coming through the pump, but not in the filter on the side towards the rear. I cranked quite a bit thinking it would take a minute to get the system primed, but it didn't start . Any help is appreciated and thanks in advance...Dimitri