Logo
FULL SITE MENU

Rear engine mounts 1985 alpha 1/140h.p.

G

gpavkovick7868

New member
0A509551 3.0L 0A496660 ALPHA 1
CAN I REPLACE MY REAR ENGINE MOUNTS (DOUBLE WOUND LOCK WASHER/REINFORCED WASHER SYSTEM) WITH THE (ONE PIECE RUBBER MOUNT SLEEVE AND SPACER SYSTEM) ? Is the spring washer system adequate? This is my first post, I want to order several parts from marine engine.com and the parts ordering catalog shows the integral mounts in the flywheel housing view and shows the spring washer mounts system in the in the transom plate view. Parts dept. does not know.
 
Last edited:
If you are using the old type without the knurled bottom, then you use the double wound spring parts. if your using the newest type with the knurled bottom you only use the thin washer
 
Back
Top