Hey guys... i'm in desperate need of advice on how to proceed with my boat.
Long story short, i purchased my 1st boat and got screwed over big time... took the engine off the boat only to discover the transom completely rotted.
I took to it with my angle grinder and cut the transom open to reveal and remove all the rotted timber.
Anyway, i would really like to salvage the boat by installing a new transom, but need to know how best to proceed with it so it is structurally sound.
I don't care about aesthetics. I would be over the moon as long as it floats and is safe to use.
Please have a look at the photos and let me know what you think...
Thanks guys..
Photos ---> https://drive.google.com/drive/folders/139SoOQQQUAz5x3oXmQkMTvCPqOB108b2?usp=sharing
Long story short, i purchased my 1st boat and got screwed over big time... took the engine off the boat only to discover the transom completely rotted.
I took to it with my angle grinder and cut the transom open to reveal and remove all the rotted timber.
Anyway, i would really like to salvage the boat by installing a new transom, but need to know how best to proceed with it so it is structurally sound.
I don't care about aesthetics. I would be over the moon as long as it floats and is safe to use.
Please have a look at the photos and let me know what you think...
Thanks guys..
Photos ---> https://drive.google.com/drive/folders/139SoOQQQUAz5x3oXmQkMTvCPqOB108b2?usp=sharing
Last edited: