Logo
FULL SITE MENU

7.5 exhaust leak

G

garyijams

New member
I have installed new baflfle plate and both gaskets. Water holds fine but exhaust is leaking a lot from the exhaust manifold. Is there a permetx gasket caulk that will seal the leak?
 
Did you use bolts that are too long (or the tapped holes were not cleaned out)? No way should it leak like that.

Jeff
 
Permatex aviation just brush a light coat on both sides of the gaskets and snug the bolts down good. You should see a light bead squish out all the edges of the gasket.
 
Last edited:
Back
Top