Logo

broken upper bearing carrier

crustysack

New member
I have an 02 Glastron 195sx with a Volvo Penta 4.3 gl. with an SX-M drive. Heard a grumbling behind the motor and after some research figured it was the gimbal bearing. Watched some videos on taking apart the drive and figured no problem. Long story short the drive had never been apart and the upper carrier broke. What is the best way to remove the carrier from the piece it is stuck in ( its completely off the boat) I figured a press will get it out, It is currently soaking with some pb blast, any advice would be greatly appreciated, thanks
 
Back
Top