Logo

90 hp force trim problems

Tiffany

New member
I am a first time boat owner. I have a 1990 bay liner capri with a 90 hp force motor. My tilt will go up but then starts going down on its own slowly buy not really slow. Wondering what I should do and what could be causing this. Do I need a repair kit? Model # of motor is 906x90c.
Thanks
 
Are you or do you have a mechanic that will work on it?
Location?

Your trim @ tilt unit is a 2 part system.
Top part is an electric motor that drives a hydrolic pump in the base.
The slow drift down.
That's usually the seals in the hydrolic pump.
This is a link to a repair thread on another site.
http://forums.iboats.com/forum/engi...outboards/659768-88-force-85hp-trim-drop-help


There isn't a seal kit for that unit.
It's usually find the seals and fix it yourself??
Or buy a new pump.
You operate in fresh water or salt?
If it's been in salt water it can be real difficult to repair and a replacement would be the best bet.


The pumps are all over the net, the bad is most are made in China and are CRAP.

I rebuild them if they can be removed and sent to me and they aren't too rough.
 
Back
Top