Logo
Results 1 to 2 of 2
  1. #1

    Default 1966 6hp wvb19074a

    I just got this and want to disassemble gear case. The tin cover was held in place by a circular clip. The piece w seal has two 1/4-20 holes in it, the edges of the case around that are chipped off. Is there a fiche for this unit? Here are pix. Thanx, Guzzi John-Champlin,Mn
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	101_0778.jpg 
Views:	8 
Size:	64.8 KB 
ID:	15739   Click image for larger version. 

Name:	101_0777.jpg 
Views:	6 
Size:	56.4 KB 
ID:	15740  

  2. #2

    Default Re: 1966 6hp wvb19074a

    Ok,I'll reply to myself. Put 14/20 bolts in seal holder and it came out easy w small puller. No oil whatever but a strange plastic like ring w a semi cone shaped appendage that I believe is the fossilized remains of what was in the case. The gears are rusty but hopefully not pitted like the ones in the Clinton I just replaced. The seal holder/rear bushing has an o ring but no retainer. I think there was an internal retaining ring originally but the lip of the case that would have held it is completely broken off. It all appears salvageable so I'm happy. I swapped a small chainsaw for this one and have a fellow who has a later 6hp Chrysler he'll swap for my old 22 rifle so I should have at least one runner out of it all.

Similar Threads

  1. 1966 omc
    By jaired in forum Chrysler Inboard and Sterndrive Forum
    Replies: 4
    Last Post: 01-19-2013, 08:40 PM
  2. 1966 60 hp no ign.
    By ross f in forum Johnson Evinrude Outboard Forum
    Replies: 3
    Last Post: 08-27-2010, 06:12 PM
  3. 1966 6hp Seals
    By mission in forum Johnson Evinrude Outboard Forum
    Replies: 2
    Last Post: 05-30-2010, 03:16 PM
  4. 1966 johnson 6hp
    By mission in forum Johnson Evinrude Outboard Forum
    Replies: 0
    Last Post: 05-20-2010, 11:59 AM
  5. 1966 OMC
    By pigman in forum OMC Sterndrive and Inboard Archive
    Replies: 11
    Last Post: 06-03-2009, 09:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •