Schoorthing
New member
Hi, I developed a vibration at the end of last season, when I pulled the boat out of the water I removed the props and drive. I inspected the the u-joints and checking by hand they feel great. There wasn't any water in the bellows. When I removed the props the hubs where corroded and off center. I had the hubs replaced and I also replaced the pds bearing and bellows while the drive was off. The majority of the vibration is gone but I still have a noticeable vibration around 1200 rpm, it is most noticeable when coming off plane. I do not see and damage to the props (stainless) but they where not balanced. Again the hubs made a world of difference but it's not 100% imo. I bought this boat (pursuit 2460 Denali) last year and repowered it so I don't have much time on the water with it. Just want to make it right.. any help would be much appreciated! Thanks Brian