Logo
FULL SITE MENU

Yamaha 150TLRW Fuel Line

S

smhamilt

Member
Installing new to me motor. This particular motor is directly hosed to the filter. Is this typical? It doesn't have a connector (fuel pipe joint).

Can someone please recommend the proper fuel line (to purchase by the foot) for this motor.
 
Fuel hoses are most commonly 3/8" along with options for thickness of hose. Tracing fuel line sections from tank to carbs: out tank fuel line pick up>in primer bulb>out primer bulb>in fuel/water separator>out fuel water separator>in engine fuel filter>out engine fuel filter>carbs.
 
Yamaha OEM probably does make fuel hoses, but that's one of the few parts I'll use that is not Yamaha. It's just a standard marine hose, so name brand isn't important. Most marine supply stores carry fuel hoses cut by the foot. Measure what you need before going in, then cut what you need. Below deck fuel lines have a thicker wall than above deck (either one is 3/8" ID). My local marine store (not west marine) charges like $1.25-1.75 per foot.
 
Back
Top