mercedglen
Member
So I checked the wiring from the shifter to the knife connectors, seems to be good. I pulled the bottom off, I get 4.5 6.7 ohms on both wires in the bottom drive it self. When I take 12v to the forward magnet and ground to the case, I don't hear any movement of the gear. The prop shaft seems to turn and the shaft going to the lower turns as well. This does seem funny, I would think that when in neutral without power, the gears would be apart from the drive gear on the input shaft. How do I troubleshoot this situation ?
Respectfully,
Glen
Respectfully,
Glen