Logo

need help from Italy

pietro

Contributing Member
Hi all,
I am rebuilding a 1962 chevy 283 and I need an affordable seller for a rebuild kit
Anyone can suggest to me one?
thank you
 
http://www.ebay.com/itm/1963-1967-C...m464e4e9dbc:m:mYfrxiHDY66bN_RbtgMqCaA&vxp=mtr
Have you tried ebay? You can get complete kits with the correct bearings and pistons. You will need to have the block bored over and the crank ground under. Have your machinist mic out the cylinders and crank and then give the pistons and bearings to the machinist so he can get it to spec. Be sure and check end gap on the piston rings and plastiguage the bearings before final assy. Install a high volume oil pump if available.
 
Back
Top