Logo
FULL SITE MENU

Prop

C

clkelley78

Contributing Member
Can someone tell me if a prop off an E-Tech 300 with fit a Honda BF225? Looks to have the same spline count (15), but I don't have the boat on hand to try a fit up test.

Thanks,
Chad
 
The easiest way to tell would be to call a local propeller shop. If the hub is the same, then the thrust washer and spacers may need to be changed.

If the prop has a removable hub and is not specifically an Evinrude prop, a new hub kit may be all that is needed. A good prop shop should have your answer.

If you are trying to use the prop on the same boat but different engines, the prop may have too much pitch, going from 300 hp to only 225 hp.

Mike
 
Back
Top