Logo

25 hp mercury 4 stroke efi

cyclegeo

New member
Hello everyone new here hope you can help.
Cranked my motor after setting all summer and ran fine for a while.
It started running rough and finally died. I have had this problem
ever since new on rare occasions but would always crank after pumping
the prime bulb. I was checking the fuel system and found a crack in the
filter housing. I put a new filter and housing on and primed it but
now will not start. I pressed the schrader valve on the fuel rail several times
and fuel squirted out each time. still will not start.
Thanks in advance for any help.
 
Back
Top