cowboycowgirl
New member
Hi,
We blew our engine and after taking the engine down found 1 con rod broke and another bent, the back 2 stabilizers were compromised also. The crank shaft seemed ok. we wend ahead and replace both back con rods and rebuilt the engine. Start up was fine but when we went on the test run white smoke was coming out of the breather and black smoke out of the exhaust and engine was running rough. the oil pressure started out at 50 and then started going down. Any ideas out there would be greatly appreciated. Even our mechanic is stumped or is saying it dont sound good.
We blew our engine and after taking the engine down found 1 con rod broke and another bent, the back 2 stabilizers were compromised also. The crank shaft seemed ok. we wend ahead and replace both back con rods and rebuilt the engine. Start up was fine but when we went on the test run white smoke was coming out of the breather and black smoke out of the exhaust and engine was running rough. the oil pressure started out at 50 and then started going down. Any ideas out there would be greatly appreciated. Even our mechanic is stumped or is saying it dont sound good.