Logo

can I use a teleflex control box w/ teleflex OMC cables

TheBrain

Regular Contributor
I have these Teleflex OMC control cables coming in mail


http://www.ebay.com/itm/12206042957...&bu=43961484132&cp=1&sojTags=bu=bu&rmvSB=trueI have these new longer teleflex control cables coming inmail



I ordered this Teleflex control box w/ trimhttps://www.universalmania.com/products/teleflex-control-side-mount-with-trim?gclid=CMTBuOetoM4CFYM2aQodYaIGMA&variant=26317675143



will my cables work w/ the box?

I'm just now noticing there isn't the two ignition wires coming out of this boxjust the trim.

dam it looks to me I got the correct cables for my engine but not the boxes end.

am I forced to use a OMC box?

I have a Johnson 175HP engine

Thanks STB
 
Last edited:
You may have jumped the gun pulling the trigger on buying the control box the cables may be OK. Is the ignition switch in the controls or on the dash? I believe you are talking about the neutral start switch the new box likely does not have it. At least it doesnt state it in the description. It also comes with the adaptors for the 3300/33 cables can you connect the existing cables to the box?
 
my ignition switch is part of the engines wire harness I intend on mounting it in my dash.

yes I beliee I can atleast use my OM cables (I have ye to receive).

"can you connect the existing cables to the box" WOW that's excellent suggestion will try tommow and report back.

The Teleflex box is kinddof flimsy. the rear of the cover has two cable holders I'm douting they will hold te OMC cables.

thank you for advice this is one of the major things to complete my project.
 
Back
Top