Logo

Bypass Trim Limit switch 1978 80hp Mercury

surgemc

Member
On a project boat I bought I have the control box and trim/tilt pump shown in the attached photos. The UP trim button on the handle doesn't work due to the wires from the trim tilt switch being non existent as can be seen in the photos. There were no wires from the switch attached to the pump the wires shown come from the switch and stop at the transom, so I would like to somehow create a bypass so the trim up switch will work. Is it as simple as running a jumper lead between the Blue and Purple wires?
Thanksimage_207067.jpgimage_207068.jpgimage_207069.jpgimage_207303.jpg
 
Back
Top