Logo
FULL SITE MENU

1986 110 VRO ...Did I bypass it correctly.. and fuel pump question

N

Nick168

Member
I bypassed the VRO on a johnson 110 ..what I did

- cut and plugged the oil line
-disconnected the 4 color wire from the VRO that ran from the bottom of the VRO
-disconnected the sensor wire from the VRO oil box.(2 wires,disconnected the sensor wire and cut the ground)

A question I have is about the fuel pump.. Is the fuel pump inside of the VRO? or am I ok to run the premix with the vro disconnected, without any problem with the fuel pump running.
 
I plugged the oil line on the outside of the motor at the inlet ... I cut the line and have about 2inch of tube and plugged with a bolt ... for now.. directly plug at the pump? or the line coming from the pump with maybe 7 inch of tube and plug it.. would that be fine?
 
I plugged the oil line on the outside of the motor at the inlet ... I cut the line and have about 2inch of tube and plugged with a bolt ... for now.. directly plug at the pump? or the line coming from the pump with maybe 7 inch of tube and plug it.. would that be fine?
 
Back
Top