Logo

77 Chrysler 90hp no start

rayf

New member
Inherited this engine last summer and got it running by replacing the CDI module and the preamp in the distributor. Ran great for two weeks on the lake last summer. Shut it off on the lake to help someone else with engine problems and have not been able to get it to start since. CDI box still works according to tests, replaced preamp again just cause there is no real way to test it i'm told. Checked flywheel key. Have spark at the right time,get lots of fuel, compression on all 3 is 135psi. Will try to "pop" (fire) when I let go of the ignition switch.:confused:
 
Try over on Iboats. or Franz Marine or Master Tech marine.
The Chrysler /Force forum on iboats has a couple of guys who might be able to help.
I don't know too much about this kind of ignition.
Now if it was a Onan Gen Set?
It would be the pickup sensor.
 
Back
Top