aquafennatic
New member
I have a TAMD71B and after cleaning the Exhaust elbow I replaced both the flange that connects to the turbo as well as the V-clamp that holds the Exhaust elbow to the flange. The mating surfaces are clean however I have an exhaust leak at the connection between the Exhaust Elbow and the Flange. The parts breakdown diagram does not show a gasket between the flange and the exhaust elbow. I've tried a number of things including Permatex Ultra Cooper High Heat Gasket Maker as well as also trying Rescue Tape around the connection before the v-clamp is installed. These are OK temporary solutions however they appear to fail over time. Can anyone recommend a permanent solution to my issue?
Thanks,
Mike
Thanks,
Mike