Logo
FULL SITE MENU

Carb clean

W

wismo

Regular Contributor
is there a write up on carb cleaning for the 93 90 hp merc force looks easy to remove them do i meed new bowl gaskets.
 
okay I'm going to wait one more week before I clean my carbs that way in case I run into problems that will be stuck in case I get a good day and I can go out looks pretty simple straightforward I've done motorcycle carbs before won't really mess with the float height adjustmentif they look pretty clean I'm not going to get too deep Into it the only thing I'm worried about is the gaskets for the Bowls every other Gasket I have.
 
IF???? The bowl comes off and the gasket doesn't break then you can use them again.

I spray them with WD as soon as I drop the bowl.
That way they absorb some liquid and swell(cork gasket) back up.

I use Dawn dish detergent and rinse with fresh water and blow dry.
For real crust stuff I use a carb cleaner and a wire brush or green scrubbies.

Don't use any sprays like WD after cleaning.
It only gums up.
 
The later Forces might have a filter in the system?
If not a G2 or G3 G12 Fram at Wally world.

Install between the pump and the carb.
 
Back
Top