Logo
FULL SITE MENU

BF 2.3 Where is the Pilot Jet in the carburetor ?

B

bertsoutboard

New member
The Honda service manual appears to show the Pilot Jet accessible from the top of the carburetor body.
Do I have to remove the carburetor body cover (4 screws) to get at the Pilot Jet, and do I need any special tool to remove it ?

Thanks,
Bert
 
Yes, you have to remove the carburetor body cover (aka top of the carburetor). You should only need a needle nose to carefully twist it back and forth as you pull it out.

Mike
 
Never tried. I always take off the entire carburetor. You might be able to fix it with a short cut, but it may not really be that much easier.

Give it a try.

Mike
 
Back
Top