Logo
FULL SITE MENU

Mercury Black Max 200 hp oil injection

M

mikeg4261

New member
Oil Leak
Oil has leaked from out of the motor covers down the lower unit. Being a two-stroke the only oil lines are for the oil injection. I am somewhat hesitant to open the covers and inspect the problem. At best a failed hose clamp at worst a mouse ate the rubber hose.

could someone with more knowledge than myself let me know what to expect. Yes I am mechanically inclined
I am guessing a main oil injection line with a T and then a line going to each powerhead.
Will this be an easy fix. 2 rubber lines 4 hose clamps?

any and all information would be greatly appreciated.
thank you for your time and knowledge,
Mike G

 
Thank you for responding,
My 1 gallon oil injection reservoir is located under the center console. Then I believe it is a single line going to the 200 mercury which then splits in a T connection .
one hose to each powerhead.
doing more research in the forums I am not the only one this has happened to.
someone else has noted that I would need to bleed the oil line like you were a Breakline don't know if this is true or not
Any and all help greatly appreciated
 
Back
Top