robertgcoenen
New member
Good morning, on this old (but proud) Halco 29 we installed 2 D3-130 engines. We got the Fuel level Instrument and the loom for the HIU, but because of time problems (all retired persons would understand this) we did not install the Fuel level Sender.
We have ONE tank with a Vetus Fuel level sender and instrument installed.
We bought a WEMA fuel level sender S3 E which would fit better than the Volvo sender (we bought that too).
The EVC doesn't find the fuel level sender/instrument on OEM Calibration mode?
Any guesses were could we have gone wrong......wish you all good boating weather with enough water under the keel.
Many for reading this
We have ONE tank with a Vetus Fuel level sender and instrument installed.
We bought a WEMA fuel level sender S3 E which would fit better than the Volvo sender (we bought that too).
The EVC doesn't find the fuel level sender/instrument on OEM Calibration mode?
Any guesses were could we have gone wrong......wish you all good boating weather with enough water under the keel.
Many for reading this