Logo
FULL SITE MENU

Please help me with marks for timing belt! BF30A 1995

J

jesusfreak

New member
Im putting my Honda bf30a together after a rebuild because the oil were mixed with water.
The engine is in top dead center (upper piston in top), but what about the pulley cam and flywheel?

I can see the pulley's marked with 1, 2 and 3, with a small arrow along with the mark 1.

Im sorry for the bad spelling, Im from Sweden, if thats an excuse:confused::p
 
If you have the number one piston at top dead center, there should be a small round mark on the crank (timing) pulley. It should align with an "I" mark on the block.

The T (arrow) on the cam pulley should align with the T (arrow) next to the pulley.

Put the belt on the crank pulley first....then around the cam pulley....then the tensioner pulley.

Make sure the marks are in alignment after you are finished.

Mike
 
Back
Top