barry davies
New member
Hi Barry Davies from Western Australia here,. this my first post
I have a Marine 3 cylinder Perkins 3.53 engine fixed revs 1560 c/w a Stanadyne electric stop injector pump, was running great until I decieded to slow it down a bit to check how it was running, as I was doing this I noticed it sounded a bit off and throttle spindle was sticking a bit, slowed it down to about 1000 revs but when I set the speed how it was before it may have been a bit slower, but when I tried to shut it down it wouldn't stop went to about 500 revs and stayed at that, ( it has no manual stop, I had to block the air intake )I took the lid off and every thing look ok and free , I have the manual for this pump but it has me stumped, I still runs well with no smoke at all, now when I try to stop it it goes down to about 300 revs or less but still won't stop, any help would be great, soleniod stuts down when power is off
Barry
I have a Marine 3 cylinder Perkins 3.53 engine fixed revs 1560 c/w a Stanadyne electric stop injector pump, was running great until I decieded to slow it down a bit to check how it was running, as I was doing this I noticed it sounded a bit off and throttle spindle was sticking a bit, slowed it down to about 1000 revs but when I set the speed how it was before it may have been a bit slower, but when I tried to shut it down it wouldn't stop went to about 500 revs and stayed at that, ( it has no manual stop, I had to block the air intake )I took the lid off and every thing look ok and free , I have the manual for this pump but it has me stumped, I still runs well with no smoke at all, now when I try to stop it it goes down to about 300 revs or less but still won't stop, any help would be great, soleniod stuts down when power is off
Barry