I have a fairly new ( less than 1 year )15hp 2 stroke Yamaha and I noticed a small oil stain/drip on the lower blade of the prop when it was up on a hoist. I'm petty sure it is coming from around the shaft. How difficult is it to remove the old seal and install a new one. I am in a remote area a Fiji and mechanics are few and far between. I am pretty handy with tools but have no bearing pullers or tools like that.
I can order the parts from the states and they will get to me in only a month or two!!
I won't be able to check the oil f few days when I hoist the motor onto a deck stand.
thanks in advance
I can order the parts from the states and they will get to me in only a month or two!!
I won't be able to check the oil f few days when I hoist the motor onto a deck stand.
thanks in advance