Hi guys about a month ago you helped me out with cleaning out my carby. Today i finally had a chance to take it for a test run. Two things happened. First it was a bit harder to start and when it did start i had to give it a rev to keep it going, when it warmed up it was ok.This was not much of a problem.Then when i stopped i smelt fuel and after removing the coel there was fuel leaking out of ther acelerator boot. Although the boot is cracked i believe the boot is only there to protect shaft from getting dirt on it. I believe that i will need to buy a new acelarator plunger and boot. Also do you guys know the best place to buy parts from remembering i am in Australia and some places dont post Thanks in advance.