I bought a couple of motors they other day in hopes to have one up and running one is a 15hp eska model number 14211D it has been setting for about a year and the guy said it needed a coil I got it home hooked up the gas pulled about three times and she fired up now it didn't run the best I'm thinking at the time old gas and maybe the carb needed cleaned got new gas and cleaned the carb and ran it a little more it ran better at a higher throttle went and got new plugs (they even was able to see what plugs came in it and crossed to a plug they had) now it want start it is barely firing when tested by my lucky son to hold the screwdriver in the plug wire (I had to do it for my dad it's his turn to do it for me) I got a coil that it was supposed to cross to 30560a not sure if that is right but wasn't hitting a lick out of that plug took the stator off cleaned it and put back on and it almost started after that back to barely hitting if anyone had any ideas let me know the wife is pissed lol