Logo
FULL SITE MENU

1993 15 hp evinrude shuts off when put in gear

G

Greg m

New member
I have a 1993 15 hp evinrude that starts and runs fine but the second it is put in gear it shuts right off with no hesitation and will not start back up until after it sits for a couple hours. Having the carb rebuilt failed to correct the problem. Could this be some sort of electrical problem or what. Any ideas would really be appreciated. Thanks Greg m
 
Try turning out (counterclockwise) the low speed adjustment knob about 1/2 a turn and see if it fixes the problem. Usually your condition where it starts and idles fine but dies under load is caused by a lean condition.
 
optsyeagle said:
Try turning out (counterclockwise) the low speed adjustment knob about 1/2 a turn and see if it fixes the problem. Usually your condition where it starts and idles fine but dies under load is caused by a lean condition.
Click to expand...
Ok, I will try that and get back with you, thanks
 
Back
Top