bulletine
Regular Contributor
I posted this problem in the fuel section but got no help, maybe someone may have some suggestions in this Crusader thread.
I installed a new Moeller fuel sending unit, which is different than the previous sending unit that was installed. This previous unit was the sending unit with a Moeller Fuel Sending Unit Conversion Capsule. Two wires went to the Moeller Fuel Sending Unit Conversion Capsule and two other wires were grounded to the sending unit.
I installed a new sending unit (Moeller) without the Unit Conversion Capsule, it has a center post for positive, and a spade for the negative wire. My thought was to do away with the capsule and connect the two wires so the gauge would read correctly. The problem is the guage is not reading the sending unit, and I have two extra wires not used now, these were the wires that grounded to the old sending unit.
I tried all combinations of attaching the wires and had no luck in getting this to work. The Moeller Fuel Sending Unit Conversion Capsule I had is only a year old, and I think it works fine. The new sending unit was installed correctly.
The new sending unit is: Moeller Product Description: 4"-28" Electric Sending Unit Tank Depth
Product # 035725-10
Any suggestions would be helpful.
I installed a new Moeller fuel sending unit, which is different than the previous sending unit that was installed. This previous unit was the sending unit with a Moeller Fuel Sending Unit Conversion Capsule. Two wires went to the Moeller Fuel Sending Unit Conversion Capsule and two other wires were grounded to the sending unit.
I installed a new sending unit (Moeller) without the Unit Conversion Capsule, it has a center post for positive, and a spade for the negative wire. My thought was to do away with the capsule and connect the two wires so the gauge would read correctly. The problem is the guage is not reading the sending unit, and I have two extra wires not used now, these were the wires that grounded to the old sending unit.
I tried all combinations of attaching the wires and had no luck in getting this to work. The Moeller Fuel Sending Unit Conversion Capsule I had is only a year old, and I think it works fine. The new sending unit was installed correctly.
The new sending unit is: Moeller Product Description: 4"-28" Electric Sending Unit Tank Depth
Product # 035725-10
Any suggestions would be helpful.