Logo

Water issues

211Mako

New member
I have a 1989 Yamaha 200 2 stroke. I have replaced the water pump and housing because there want any water coming out of the piss hole.Now the only way to get water to come out of the piss hole is to hold the ears tightly to the lower unit. Once water starts to come out its fine but if I shut the engine off and wait a few minutes, it wont pickup on its own. I have put a hose on the tube that goes into the top of the water pump and water comes out fine so I think everything is ok in the top end. Any ideas? What am I missing?
 
Are you getting out flow from the prop etc. If so you might have a restricted pee line. Make up some kind of small tip that you could hook up to a hose and back flush from the pee hole. Mine was blocked with no flow once and it worked for me. Thanks to a post on the forum.
Good luck;
flabob1
 
Back
Top