Logo
FULL SITE MENU

1998 Yamaha 40 tilt problem Just clicks at the relay

I've had relays before that would click but still be bad. it may have burned up on the load side of the relay instead of the source side. that would explain the slow movement then quitting all together. as long as the source side isn't burned up and has power it will click when it tries to operate like normal but when it does there is nothing there to make contact with. hope this helps
 
had the same thing -- checked to see if 12v to motor when relays kicked in, was ok -- checked inside motor. the
two brushes were corroded -- cleaned them up - away she whent.
 
Back
Top