Logo
FULL SITE MENU

1956 Evinrude 7.5 hp Fuel connector ??

B

bountyhunter

New member
ok I,m working on my dual line connector, that is on the end of fuel lines
I broke one of the fitting of that screw into that connector
I don,t! know much about fItting sizes can anyone please tell me the hose barb size and the screw in part size thinking might be 1/8 " but not sure
any help would be a great help
Thanks Ferris
 
5/32" hose. Threads are 1/4-28............As well as I can remember. I don't have a threaded one to look at. Later models did not have threaded fittings.

EDIT: I think that's wrong. I found a fitting that I THINK came out of a fuel connector. The threads are smaller than 1/4", but larger than #10. Must be #12. Certainly not a standard fitting.
 
Last edited:
Did you see my edited reply? Anyhoo, part number is 301820. See an Evinrude dealer. He probably won't have one, but can order one.
 
Back
Top