newboater67
Contributing Member
I have a 2000 Honda BF50AY that I'm getting no spark on any of the cylinders.<br>
<br>
I have not ohm'ed out the CDI unit yet but the exciter coil, all 3 pulser coils and all 3 ignition coils tested in spec. The service manual says you have to remove the spark plug cover to get the correct results (2.8-3.4 Kohms for the coil and spark plug wire). <br>
<br>
You have to remove the covers because the ones installed on my motor are Nichiwa LD10F which should measure 10K. I have one that reads 350-450 Kohms and can't find them on the internet or Honda parts diagrams.<br>
<br>
Nichiwa was bought by NGK, but I get no results found when I try searching for them on NGKs site.<br>
<br>
Does anyone know if the specs for the covers/boots for the spark plug wires have ever been changed? All the ones I find on the internet are 5K. I can only find the 10K caps overseas in euros.
<br>
I have not ohm'ed out the CDI unit yet but the exciter coil, all 3 pulser coils and all 3 ignition coils tested in spec. The service manual says you have to remove the spark plug cover to get the correct results (2.8-3.4 Kohms for the coil and spark plug wire). <br>
<br>
You have to remove the covers because the ones installed on my motor are Nichiwa LD10F which should measure 10K. I have one that reads 350-450 Kohms and can't find them on the internet or Honda parts diagrams.<br>
<br>
Nichiwa was bought by NGK, but I get no results found when I try searching for them on NGKs site.<br>
<br>
Does anyone know if the specs for the covers/boots for the spark plug wires have ever been changed? All the ones I find on the internet are 5K. I can only find the 10K caps overseas in euros.