Logo

spark plug boots

jermbos

Member
im looking to replace the 2 spark plug boots on my 70A2. Both are the screw on type with 5k ohm resistor inside. Do i really ned the resistor? i'm thinking the previous owner put them on and im thinking i dont need the reistor type plug boot.
 
On the original 70A2, the ignition coil and CD were integrated into one unit, with plug caps on the HT wires. On later models, such as the 70C, the plug caps are available separately. They do have resistance, for radio interference suppression. If yous are bad, you can order 3C7069210M PLUG CAP (WITH WATERPROOF RESISTANCE) $23.82 from any dealer. If you use non-resistor boots, you may want to use resistor-type plugs. Resistance is a requirement in Canada.
 
thanks Paul, I ended up buying a couple NGK boots from the local NAPA auto parts store. worked perfect, now the thing purrs again.
 
Back
Top