My 9.9 4-stroke Honda was revised some 3 years ago and worked beautifully since then.
Now, just as every 3-4 years with most out-bords, it tends to stall when in idle (even if warm), which forces me to gear in at higher rpm.
Obviously these little babies suffer from spending winters outside and being used a couple of times in summer, but I would appreciate your advice on what I could clean/adjust to avoid spending 200 bucks for nothing.
Thanks in advance!
Now, just as every 3-4 years with most out-bords, it tends to stall when in idle (even if warm), which forces me to gear in at higher rpm.
Obviously these little babies suffer from spending winters outside and being used a couple of times in summer, but I would appreciate your advice on what I could clean/adjust to avoid spending 200 bucks for nothing.
Thanks in advance!