ehlien
Regular Contributor
The engine is in great shape but has not been run for about 10 years. Visually its like new.
I put in a new water pump and rebuilt the carbs.
It seems to take a lot of cranks to get going Seems like its easy to flood but i also have to give it high throttle to make it catch. It will not idle till warmed up but once you do go to idle it stalls out quickly.
I have read a lot of posts and it seems to be a common problem with MANY corrective suggestions. Since i rebuilt the carbs I'm thinking they mixture ir idle adjustment may need adjustment but I'm not sure where to find the correct screws. Can someone help me out here. If someone has a picture/diagram they coudl post or point me to where I might see one that would help too. Other simple trouble shooting suggestions would also be appreciated.
Thanks much!!!!!!!!!!!!
I put in a new water pump and rebuilt the carbs.
It seems to take a lot of cranks to get going Seems like its easy to flood but i also have to give it high throttle to make it catch. It will not idle till warmed up but once you do go to idle it stalls out quickly.
I have read a lot of posts and it seems to be a common problem with MANY corrective suggestions. Since i rebuilt the carbs I'm thinking they mixture ir idle adjustment may need adjustment but I'm not sure where to find the correct screws. Can someone help me out here. If someone has a picture/diagram they coudl post or point me to where I might see one that would help too. Other simple trouble shooting suggestions would also be appreciated.
Thanks much!!!!!!!!!!!!