Logo

Tamd diesel

roger007marina

New member
No start on Volvo tam d ,with Bosch injection pump,have supplied diesel fuel to injection pump and bleed return,no diesel fuel present at injectors or at discharge on pump,also glow plug circuit innoperative as no light comes on ,possibly related ?fuel cut magnet switch on top of pump has 11.03 volts when key on and 7.61 volts while cranking,will not start even with 12.0 volts applied,any ideas,thanks roger
 
Just fixed a problem on our KAD32's. Don't know if your engine is the same, but on the KAD32 the fuel shut off solenoid only gets 12v when you switch off (i.e. hold the key in the engine off position).
 
Back
Top