Logo
FULL SITE MENU

chrysler 105 Magnapower II no spark on number 4 plug.

C

condorsn

New member
Hi all.

I have a chrysler 105 Magnapower II. I have two problems. I have no spark on number 4 cylinder 1 2 3 have spark.
I have changed the plug and coil still no spark.
Also the alternator is not charging.
I have read all the test procedures and find it all a bit confusing.
If some one has had these problem(s) can you please tell me what electronics to replace.
Alternator/stator. Trigger module. Capacitor module. CD module these are all under the fly wheel.
Thanks for any help.
I have been restoring my 70's speed boat for around four years and need to get the motor running good.
DSCF3262.jpg

DSCF3263.jpg

Image0461.jpg
 
Outboard ignition . com They have test procedures for the Chr/Force Also CDI Ignition they have em too. iboats . com Chrysler/Force forum, post there. FrankA works on the older ones.He might be able to help.
 
Ok Im getting great power out of it now and runing on all four. It had a faulty trigger. Still not sure if it's charging the amp meter shows the same volts as the battery volts when the motor is running at 800-1000 rpm. Not sure if it only charges at higher revs.
Thanks for the comments.
 
Back
Top