Trying to remove a fresh water circ pump (jacket water) from a TMAD40. Removed the relay box and water blank, removed the jacket water cooler for access to a drain pipe on the back of the pump outlet, removed the 6 fasteners which hold the pump body to the block, removed the various pipes etc and the pump will not come out?
the pump will rotate around the shaft access about 5mm but will not release from the block. Can't see any additional fasteners and can't see anything external which can be holding it back.
Anyone any ideas???
the pump will rotate around the shaft access about 5mm but will not release from the block. Can't see any additional fasteners and can't see anything external which can be holding it back.
Anyone any ideas???
