Logo
FULL SITE MENU

'96 Yamaha 200

Swap the coils around and see if the no spark follows the coils. Could be bad coil or bad sparkplug wire. The sparkplug wires will get a corrosion buildup on the ends that can kill the spark. You have to unscrew the plug wires from the coils for inspection.


-Mike
 
Open circut on yellow wire to ecm. Usual corossion area under stb. head near tell tale outlet in harness. Remember you need amp's to the ecm not just a few volts. Salt is conductive. Thanks Martin
 
Back
Top