Logo
FULL SITE MENU

Mercury Foce 50H.P. 1989

N

Nathan Kolcun

New member
Model # 507R9B Getting water into lower cylinder.When I remove the lower plug and turn engine over , little water is blowing out. Engine will run fine for about 5 min. after blowing water out of cylinder.Head gasket? Please help Thanks Nate !
 
I believe this is a head gasket. Have you checked compression on cyl? Since you will be placing a new head gasket on anyway you could take the head off and look at the walls to make sure there is not a crack in the wall.
 
Like Nick says,the head gasket is probably the culprit.
Remove it and inspect the gasket and other parts.
Pics?
Profile??? Location?You might be close to someone who can help.J
 
Back
Top