Logo

Creative Trolling Motor Mount

Donewright

Regular Contributor
Greetings,

I came up with a creative way to mount my spare trolling motor. To prevent the tubing from crushing when the bolts were tightened, I inserted 3/4 OD aluminum rod into the hollow tubing, then drilled through it for the mounting bolts. Appears to work just fine. I have not had it in the water yet, but I'm sure getting that fishing fever!!!!!!!!

(For peace of mind while driving down the road, I replaced the OEM set screws with 1/4 inch bolts directly through the tubing.)

IMG_2683.jpg IMG_2684.jpg IMG_2682.jpg
 
Last edited:
Back
Top