Logo

Refilling coolant system

cusimano

New member
I have a Universal M35b and I have replaced the thermostat, impeller, heat exchanger, and all of the hoses because of an overheating issue i am trying to solve.

My question is: What is the proper way to refill the coolant system.

Thank you for your time,

chris
 
I open the bleed valve on top of the thermostat housing , then fill with coolant till you get fluid coming out of the bleeder. Start and run engine at high idle , shut down and refill , repeat as many times as necessary. Have you checked the gasket at the exhaust riser ?
 
Back
Top